INFINITY®
C SERIES
4-DIGIT
INDICATOR/CONTROLLER
4-digit (9999) meter.
Standard features include a wide selection of signal input choices, peak
value recall, front-panel tare (on applicable model), sensor excitation,
large digital offset capabilities for display in engineering units. Options
include dual 6 A form C relay outputs and scalable DC volt or mAdc outputs,
NEMA-4 splash proof cover.
Note: Output
options unless noted, are not field installable and must be specified
at time of order.
INPUT
TYPE
Process
meter accepts 0-100 mV, +50 mV, 0-5 V, 1-5 V, 0-10 V, +5 Vdc, 0-20
mA and 4-20 mAdc inputs, with 5, 10, 12 or 24 Vdc sensor excitation.
|
|
Factory
default setup is 4-20 mA input with 24 V sensor excitation and scaled
to display 0-100.0 |
$245.00
|
Strain
gage meter that accepts 0-100 mV, +50 mV, 0-5 V, 1-5 V, 0-10 V, 4-20
mA or 4-20 mAdc signal inputs. Standard features include sensor excitation
of 5, 10, 12 or 24 Vdc.
|
|
Factory
default setup is 0-100 mVdc input with 10 Vdc sensor excitation
and scaled to display 0-100.0 |
$245.00
|
Temperature
meter that accepts type J, K, T and DIN J thermocouples. Standard
features include resolution of 0.1░ or 1.0░, ░F or ░C indication.
|
|
Factory
default setup is type K thermocouple input in░F |
$245.00
|
Temperature meter that accepts 2-, 3- or 4-wire
100ohm platinum RTDs. Standard features include resolution of 0.1░
or 1.0░, ░F or ░C indication.
|
|
Factory
default setup is 3-wire input, alpha =0.00385 shown in ░F |
$245.00
|
Temperature meter that accepts most popular thermistor
inputs such as series 400 and 700 sensor inputs. Standard features
include accuracy of +0.1░C, resolution of 0.1░ or 1.0░, ░F or ░C indication.
|
|
Factory
default setup is 2252ohm @ 25░C input type, in ░F |
$245.00
|
Differential
temperature meter that accepts type J, K, T and DIN J thermocouples.
Standard features include front-panel selection of T1, T2 or T1-T2 indication,
resolution of 0.1░ or 1.0░, ░F or ░C indication and dual setpoints.
|
|
Factory
default is type K thermocouple shown in ░F |
$345.00
|
Differential temperature meter that accepts 2-,
3- or 4-wire 100 ohm platinum RTDs. Standard features include a choice
of 0.00385 or 0.00392 alpha curves, resolution of 0.1░ or 1.0░, ░F or
░C indication.
|
|
Factory
default setup is 3-wire input, alpha = 0.00385 shown in ░F |
$345.00
|
Temperature
meter that accepts type J, K, T and DIN J thermocouples and has
time proportional relay and open-collector outputs. Standard features
include resolution of 0.1░ or 1.0░, ░F or ░C indication, analog and dual
relay outputs.
|
|
Factory
setup is type K thermocouple shown in ░F |
$395.00
|
Temperature meter that accepts 2-, 3- or 4-wire
100 ohm platinum RTDs and has time proportional relay and open-collector
outputs. Standard features include resolution of 0.1░ or 1.0░, ░F or ░C
indication, analog output and dual relay outputs.
|
|
Factory
default setup is for 3-wire input, alpha = 0.00392 shown in ░F |
$395.00
|
pH
controller 0.00 to 14.00 pH. Standard features include automatic or
manual temperature compensation, quick calibration to 4, 7, and 10 pH,
accepts most BNC combination pH electrodes with or without 100
ohm RTD, analog output and dual relay outputs.
|
|
pH
controller 0.00 to 14.00 pH |
$395.00
|
ORP controller
-2V to +2V. Standard features include display of calibrated ORP or RAW
millivolt values, analog output and dual relay outputs. Includes on-line
or manual calibration.
|
|
ORP
controller -2V to +2V |
$395.00
|
|
|
Combination
pH/ORP controller. Includes analog and dual relay outputs
|
$495.00
|
|
|
Conductivity
controller with analog and dual relay outputs. 1╡S/cm to 1 S/cm,
manual/auto temp comp |
$395.00
|
MOST POPULAR MODELS
|
INFCP-010A
|
$315.00
|
|
INFCT-011A
|
$395.00
|
|
INFCS-011A
|
$395.00
|
|
INFCpH-011A
|
$395.00
|
POWER AND LED COLOR
|
0
|
Designates
115 Vac power and red LED display |
N/C
|
|
1
|
Designates
230 Vac power and red LED display |
N/C
|
|
2
|
Designates
115 Vac power and green LED display |
N/C
|
|
3
|
Designates
230 Vac power and green LED display |
N/C
|
|
4
|
Designates
10-32 Vdc power and red LED display |
$95.00
|
|
5
|
Designates
10-32 Vdc power and green LED display |
$95.00
|
|
6
|
Designates
26-56 Vdc power and red LED display |
$120.00
|
|
7
|
Designates
26-56 Vdc power and green LED display |
$120.00
|
CONTROL
OUTPUT(S)
|
0
|
No
control outputs |
N/C
|
|
1
|
Dual
6 A, form C relay outputs |
$70.00
|
|
*Standard
on INFCpH, INFCOP, INFCOR, INFCTP, INFCRP |
N/C
|
ANALOG
OUTPUT
|
0
|
No
analog outputs |
N/C
|
|
1
|
Analog
output selectable in volts DC or mAdc |
$80.00
|
|
*Standard
on INFCpH, INFCOP, INFCOR, INFCTP, INFCRP |
N/C
|
ADD-ON OPTIONS
|
FS
|
Special
calibration configuration |
$25.00
|
ACCESSORIES
|
TP1A
|
Trimplate
panel adaptor. Adapts DIN1A/DIN2A cases to larger panel cutouts |
$30.00
|
|
